Coal Storage Air Dome: Inspection & Maintenance Guide

With the continuous growth in energy demand, the coal industry has experienced rapid development. During the storage and transshipment of coal, the safe operation of coal storage yards is of critical importance. As a novel type of covering for coal yards, air-supported membrane structures offer numerous advantages—such as large spans, low profiles, light weight, energy efficiency, and environmental friendliness—and have been widely adopted across the coal industry. To ensure the proper operation of these air-supported coal storage facilities, effective operational and maintenance strategies must be implemented.

The specific tasks for the inspection and maintenance of air-supported structures include the following:

  1. Inflation Equipment Maintenance: Ensure that the inflation equipment is in good working order, all components are functioning correctly, the system maintains proper airtightness, and fresh-air intakes remain free of obstructions.
  2. Control System Maintenance: Inspect and service the electronic components, instruments, and sensors within the control system to ensure its reliable operation.
  3. Backup Power System Maintenance: Verify that the backup power system’s automatic start-up function is operational, batteries are in good condition, and fuel reserves are sufficient.
  4. Foundation and Anchorage Maintenance: Ensure that all foundation anchorages remain secure and reliable; any identified anomalies must be repaired promptly.
  5. Membrane Repair and Maintenance: Promptly repair any damage to the membrane material to prevent tears or punctures from expanding.
  6. Membrane Surface Cleaning: Clean the membrane surface periodically. Such cleaning should be performed under the guidance of professional technicians to ensure that the cleaning agents used do not damage the membrane material.
  7. Cable and Cable-Net Maintenance: Ensure that cables and cable nets remain taut and properly positioned, and verify that all cable hardware is intact and free from corrosion or rust.
  8. Connection Node Maintenance: Inspect and maintain connection nodes to ensure they remain fully functional, secure, and free from loosening or displacement.

The above points outline the specific tasks for the inspection and maintenance of air-supported structures. The frequency for executing each task should be determined based on the actual operational status of the facility and the specific environmental conditions in which it is located.

Newsletter Updates

Enter your email address below and subscribe to our newsletter